SCM Automatic EdgeBander OLIMPIC K560 T-ER2

MACHINE# SSU-00064-1M

SCM SINGLE-SIDED AUTOMATIC

EDGE BANDER OLIMPIC K560 T-ER2

 

MAIN ADVANTAGES

– VERY HIGH PANEL QUALITY thanks to the 2 MOTORS ROUNDING UNIT

that allows the simultaneous edge trimming operation

– PRODUCTIVE with a 12-18 m/min feed speed and a 600 mm distance

between panels also during rounding operation,

– RAPID WORK CHANGEOVER between thin, thick and solid wood edges due

to the 3-positions trimming unit equipped with “Combi” tools.

– ERROR FREE MACHINING and optimum visualisation of information

with the “Touch 7” control with Touch-Screen colour display.

 

TECHNICAL DATA

GENERAL DATA

Track feed speed m/min 12 – 18

Panel thickness mm 8-60

Thickness of edges in strips

* (6 mm only with kit for material in strips)

mm 0,4-3 (6)*

Thickness of rolled edges mm 0,4-3

Max. section of rolled edges mm² 135

Coil-holder plate diameter mm 780

Exceeding material to the panel thickness mm 2+2

Distance between two successive panels m m 600

Minimum panel length (100 mm min. width) mm 140

Min. length of edge in rolls mm 180

Min. length of edge in strips mm 220

Min. panel width (210 mm min. length)

* (60mm with units adjustment modification)

mm 95 (60)*

Opening for panel support roller mm 560

Worktable height mm 900

RT-V PANEL EDGE TRIMMING UNIT

Max. removal mm² 55

Max thickness removal mm 3

Motors power kW 1,5

Tool diameter mm 100

Tool height mm 63

Tool rotating speed rpm 9.000

VC-MX GLUE POT UNIT

Installed power kW 4,8

Heating time min 12

Glue pot capacity kg 2,5

K-SEL END CUTTING UNIT

Motors power kW 0,35

Speed of cutters rpm 12.000

Manual blades tilting 0°-15°

R/K TRIMMING UNIT

Motors power

* (0,55 kW only with kit for material in strips)

KW 0,35 (0,55)*

Speed of cutters rpm 12.000

Min. panel thickness with radius mm 12

Vertical/front copying devices disc/pad

Knives radius mm 2

ROUND X ROUNDING UNIT

Motor power kW 0,35

Speed of cutters rpm 12.000

Edge thickness mm 0,4 – 3

Panel thickness

– with a straight angle

– with a shaped angle (according to the profile)

mm

mm

Oct-50

10-30/40

Min. panel length mm 140

Min. panel width mm 100

Max. working speed during rounding operation m/min 12

Max. working speed during only trimming

operation

m/min 18

Distance between two successive panels mm 600

Vertical/front copying devices pad/pad

Knives radius mm 2

RAS-K EDGE SCRAPING UNIT

Min. panel thickness mm 12

Vertical/front copying devices disc/disc

Knives radius mm 2

 

GENERAL FEATURES

Automatic single-sided edge bander for the edge gluing with hot melt glue on straight

panels, on the four panel sides, finishing and rounding-off of the panel corners

Base made of curved and welded steel plates to ensure a vibration free, highly

rigid structure. Openings with shoots for the removal of shavings to the floor that are

not collected by the dust extraction.

Top presser made of curved and welded steel plates and supported with steel

columns. It provides a vibration free structure on which the operating groups are

located.

Two rows of high-adherence rubber panel pressure wheels on the track and

mounted on bearings. An enclosure covers the wheels.

Manual adjustment of presser at the machine’s infeed with positioning numerical

readout

Top operating groups fixed to the presser or mechanically connected on to it to allow

the automatic positioning according to the panel thickness. Lower groups fixed to the

horizontal beam for a precise reference with respect to the panel.

All high frequency motors are equipped with static inverter.

Safety enclosure on the entire length of the machine with poli-carbonate windows for

the groups visualisation during machining.

2 doors for the access to the operating groups; the first one with the only electric

interlocking for the gluing unit and the second one with electro-mechanical

interlocking for the remaining groups.

Exhaust outlets for the operating groups positioned on the top side of the safety

enclosure

Mobile control panel at machine infeed for an easy use from the operator”s working

position

Electrical cabinet in conformity with the current safety regulations.

Electrical component positioned inside the base with door that allow an easy

access in case of any maintenance operations.

Feed track made of pads coated with high friction rubber fixed on 1-1/4”¾

industrial chain.

Sliding of pads on two guideways (in hardened steel), one round and one flat, to

ensure straightness of movement and resistance to side loads

Manual pads lubrication.

Panel support rollers positioned parallel to the track. It can be extended on the entire

lengh of the machine. It is made of telescopic opening system and panel sliding plastic

wheels with steel pivot pins.

Safety regulations

The machine is in conformity with the safety regulations according to the countries ofmachine destination.

Attention: for some countries it is necessary to select the specific optional

code foreseen on the price list

 

NOTE

The machine includes the free space for the installation of the following optional

groups

(½) = Glue scraping unit

(1S) = Brushing unit

 

01.15.57 Olimpic K 560 “T-ER2” composition N. 1

 

62.12.03 “AAR” anti-adhesive unit N. 1

positioned before the panel edge trimming unit.

It prevents the glue sticking to the upper and lower panel surfaces,

though improving the cleaning.

This unit is complete with two spraying guns and tank for the antiadhesive

liquid.

N.B. available only for machines with panel edge trimming

Unit.

 

62.11.26 Diamond tools for “RT-E” panel edge trimming unit h=49 N. 1

in place of the standard ones D 100 H=49 Z 2+2

45 mm max. panel height.

 

62.13.53 SP-V Brushing unit N. 1

with 2 independent motors (0,13 kW to 1.400 rpm) for the edge

cleaning and polishing