Home / Products / Edge Banders / F13 BRANDT EDGE TRIMMING MACHINE

F13 BRANDT EDGE TRIMMING MACHINE

Quantity Required:

Description

MACHINE # SZU00376
F13 BRANDT EDGE TRIMMING MACHINE

For simultaneous top + bottom radius /
flush trim of the overhanging edge
material on straight edges and shaped
workpieces with inside and outside radii.

Equipped with stop rails for straight
edges and centric copy rollers for
shaped workpieces.

Pneumatic motor separating device for
shaped parts. Precise adjustment top
and bottom.

Upper and lower trimming motors are
independently mounted and tracing.

Trimming works only in contrary direction
to workpiece direction.

Standard equipment :
- Double sensing roller f. straight panels
- Simple sensing rollers f. shaped workpieces
- Blow-off device for trimming chips
- Static frequency changer 200 cycles, incl.
electronic motor brake

In case of main voltage fluctuations of more
than +/- 10%, a voltage stabilizer must be
installed at customer's site.

Workpiece thickn. (radius trim) : 16-55mm
Workpiee thickn. (chamfer trim.) : 12-55mm
Workpiece width : min. approx. 30mm
Inside radius : min.approx. 35mm
(depending from edge radius and
workpiece shape)
Edge thickness : max. approx. 3,0mm
Trimming tools : 2 x insert radius cutters,
r = 3mm, diam. 67 x 21 x 16 mm , T = 4
Trimming motors: 2 x 0,35kw, 11.800rpm
Electrics : 400V/3Ph/50Hz
Connected load : 0,7kw
Pneumatic connection : 5 bar
Extraction : 1 x diam. 80mm
Space requirement : 1200 x 800mm
Working height : 900mm
Weight : approx. 250kg

Should you not find any suitable machine, please drop us an enquiry.